Yes. Rustic Grove Planks and 3-D Wall Panels are made from 100% reclaimed wood.

Rustic Grove planks and 3-D Wall Panels can be used on most indoor surfaces that are relatively smooth, dry and free of dust and debris. It can be applied to walls, backsplashes, islands, etc. It cannot be used as flooring or counter top material.

Please refer to our installation guide for step-by-step instructions. Be sure to remove your Rustic Grove product from the box and allow it to acclimate inside your location for 72 hours before installation.

Use a vacuum attachment to clean off any dust or debris.

Indoor use as a backsplash is fine, but as with all natural wood products, there is some inherent risk of staining and rot. Wood sealers and varnish can provide protection against this. They will both provide protection, but can alter the appearance of the wood planks. There are two main types of wood protectants: sealers and varnish. Varnish penetrates the wood and protects from within by filling all pores and cavities with a protectant. Sealers retain the natural appearance of the wood as much as possible. Sealers, such as Thompson’s^® Water Seal^® Waterproofer Plus Clear Wood Protector or Cabot^® Waterproofing Silicone Sealer (and similar products), offer moderate protection. Follow manufacturer’s directions. Wood varnish is a durable coating that bonds to the wood surface. These products slightly darken the wood color and have a semi-gloss finish. Wood varnishes, such as Minwax^® Polycrylic^® Protective Finish or Cabot^® Spar Varnish Semi-Gloss (and similar products), provide a high level of stain protection. Follow manufacturer’s directions.

Rustic Grove is manufactured for indoor use only.

We recommend a minimum 6-inch space between the heat source or burner and the installed wood planks. You may also refer to your stoves (or other heat source) manufacturer for specific information.

You can use pre-manufactured wood trims found in the retailer’s millwork section or create your own trim pieces from the Rustic Grove plank or panel material.

To seal your planks and panels, use a good wood sealer or polyurethane finish to protect the wood. Follow the manufacturer’s directions. Sealers and polyurethane finishes can deepen and darken the color of the wood. Choose from finishes that can leave a high sheen or glossy appearance, or satin finishes, much like paints.

Yes you can if you’d like. The Mixed Brown planks are finished with an oil-based stain, so you’ll need to use an oil-based paint. We recommend using a darker color otherwise, multiple coats will be needed to hide the original color. The three gray-colored planks are finished with a water-based stain, so you’ll need to use a water-based/latex paint with them.

Starting from a corner and working left to right on your longest run produces the best results.

At this time, we do not offer matching switch plates or outlet covers.

They are made from reclaimed pine.

You can use a miter box or a miter saw for the best results. See our installation guide for details.

ACP, the manufacturer of Rustic Grove wood planks and 3D Panels, guarantees our products will be free from manufacturing defects for a period of (5) years from the date of purchase. This warranty does not cover problems caused by improper installation methods. It covers on installations done in accordance with the installation and handling instructions contained within each box of planks. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or finish color changes due to exposure to make, fumes, leaks or abuse. This warranty is not transferable and applies to the original purchaser only.